1. Installation
Step 1: Remove the simulated burning end (indicator cover);
Step 2: Insert the battery with cathode facing inward, and anode outward;
Step 3: Tighten the simulated burning end (indicator cover);
Step 4: Combine the cigarette holder and artificial liquid nicotine into the e-cigarette’s body and then tighten it;
Step 5: Drop the liquid nicotine onto the cartridge and then you can “smoke” it.
2. Inhaling
A smoker normally sucks a regular cigarette for 15 times before the cigarette is used up. So, it is recommended the user should stop inhaling the smoke after he sucks an e-cigarette for 14-16 times. The user should wait for another 30 minute before a fresh inhalation.
3. Running s, state
Once the e-cigarette is sucked by the user, the circuit in it will begin to work. At the time, the stimulated burning end at the front will be illuminated (you change the battery when it becomes dim), and the atomization chamber start working. The atomization process stops when inhalation is finished. The system then changes to the standby state.
4. Standby mode
Install the special fully charged lithium battery into the device’s body, with reference to the indication of poles on the product. Then open the liquid box in the cartridge, remove the cap, take out the combined cigarette holder and tobacco core and inhale it into the body. Then the device is in standby mode.
5. Restore running
After the device is in use for 20-30 days, even if a new cartridge is placed and the battery is fully charged, the amount of atomized smoke may be noticeably reduced. In this case, you should take out the cartridge and use a pin or other metal wire to penetrate the simulated burning end keeps its illuminating state. You can insert the pin for ten seconds and each restoration requires two times of insertion. Once the functions are restored, the device can work again. However, this switch should not be used frequently. See the picture.
6. Use the battery and battery charger
If the stimulated burning end becomes noticeably dim, you should use the attached battery charger to charge the battery. Pay attention to the pole indication on the charger and never reversely connect charger when you use it. After the batter is charged for 3-4 hours, the indicator will turn from red to green, suggesting the battery has been fully charged. So, you can take out the battery and disconnect the charger from the power source.
7. Using the artificial liquid nicotine
The artificial liquid nicotine, a substance developed by our company and especially used for the e-cigarette, is made through the process that extracted essence from natural plants such tobacco is mixed with tobacco essence and food additive. Product in accordance with GRAS standard of FDA and the principle of nicotine replacement, the liquid doesn’t contain tar, carbon dioxide and other substances that pose harm to human body. Examination by the competent authority testifies that the liquid nicotine is conforming.

Precautions:
Use the liquid nicotine immediately after it is put in to the cartridge. Do not repeatedly take out the cigarette holder and the core.
Liquid nicotine serves as supportive product and can only be used together with the e-cigarette. Never attempt to put it into your mouth directly. Keep it a way from children.